Sauna room is also called sweat room, originated in Finland, it includes dry steam room and wet steam room, but people usually say that the sauna room is a dry steam room, and the steam room is a wet steam room. Traditional sauna is the use of burning mineral stone, water on the above to produce steam, and modern is the use of far infrared and negative ions to achieve the effect of sauna, sauna room with weight loss, detoxification, rheumatism and other effects, much loved by consumers. The sauna installation must pay attention to two aspects, on the one hand is the sauna insulation, on the other hand is the sauna wind.
Sauna insulation

Disinfectant swimming pool configuration Sauna walls, ceilings and doors should be provided with suitable insulation treatment. When calculating the electric heater power request, about 1.2 cubic meters of volume will be added per square meter of uninsulated details. Suitable moisture-proof treatment should be held, and the policy is to suppress the damp gas into the wall of the other room, and the moisture-proof installation should be installed between the heating insulation layer and the slats.

The thermal insulation and moisture-proof installation of the sauna room shall be shifted from the outside to the inside according to the following specifications.

1, the thickness of the wall insulation layer should not be less than 50mm, and the ceiling thickness is not less than 100mm.

2, the use of cardboard boxes or aluminum foil as a vapor barrier distance layer, installed on the top of the insulating aluminum foil.

3. Leave at least 20mm air slot between the steam barrier distance layer and the external slats.

4, in order to keep wet gas behind the slats, grooves should be reserved between the wall slats and the ceiling.

The sauna room is too windy

For a soothing sauna effect, the sauna should mix the right proportion of hot and cold air. Another cause of the wind is to receive the air around the electric heater and transfer the heat to the far end of the room. The central position of the air inlet and outlet is arranged according to the proportion of the central part of the house.